Skip to content
Brolick
← All articles

Strength Training for Athletes: Build Force That Carries Into Your Sport

Strength Training for Athletes: Build Force That Carries Into Your Sport

Athlete catching a barbell power clean

Athletes get the most from strength training by lifting heavy through a full range of motion at least twice a week, building a base of multi-joint lifts, and then adding fast, lighter work for power. The plan has to change as you get stronger and as your season changes. Brolick is an intelligent fitness tracker that learns from your workouts and adapts your training, so the load, rest and exercise choices follow your own history instead of a fixed template. It is available now on Google Play (Android) and coming soon to the App Store.

Brolick
Adapt Strength Training to Your Progress
Brolick learns from your workouts and recommends training intensity, rest periods, and exercises based on your performance and preferences.
Get it on Google Play

TL;DR

  • Strength work improves jumping, sprinting and changing direction, and a 2024 meta-analysis of elite athletes found a large effect on sport-specific performance.
  • Heavy loads (80% of your one-repetition maximum or more) build strength. Lighter, faster loads (30% to 70%) build power. You need both, in that order.
  • Rest at least 2 minutes between sets of multi-joint lifts, and raise weekly volume gradually.
  • In season, keep the intensity and cut the volume. Strength drops quickly when you stop training it.
  • Log every session and review your numbers every 4 to 6 weeks to see whether the work is paying off.

Table of Contents

Why strength training improves sports performance

A stronger athlete can produce more force, and force is what sport asks for in every sprint, jump, tackle and change of direction. A 2016 review of muscular strength in athletic performance links greater strength with better force-time characteristics, better general sport skills such as jumping, sprinting and changing direction, and a lower injury risk. Its authors argue there may be no substitute for greater muscular strength across a wide range of skills.

The numbers back this up. A 2024 meta-analysis of resistance training in elite athletes pooled 29 studies and found a large, significant effect on sport-specific performance (SMD 1.16). SMD, or standardised mean difference, is simply a way of expressing how big the improvement was relative to normal variation between athletes. Above 0.8 is generally considered large.

The same analysis found the benefit was bigger for national-level athletes (SMD 1.57) than for international-level athletes (SMD 0.29, not statistically significant). In plain terms: the closer you are to the top, the more finely your programme has to be tuned. The authors point to a need for personalised resistance training, and note that results depend on competitive level, the type of performance outcome and the athlete’s sex.

There is also a sport-by-sport caveat worth knowing. A 2012 review of strength training in team sports concluded that how much strength and power matter varies with the activity, but that there is enough evidence for strength training to remain a core part of preparation.

Why strength training improves sports performance

Strength versus power: what you are actually training

The two words get used as if they meant the same thing. They do not.

  • Strength is how much force you can produce, usually against a heavy load moved at a controlled speed.
  • Power is how quickly you can produce that force. It uses lighter loads moved fast.

The order matters. The NSCA Strength & Conditioning Journal reports that athletes who back squat at least 2 times their body mass can express higher power outputs in jumping than weaker athletes, and describes 2.0 times body mass as a minimum strength requirement before specialised lower-body power training. That is a useful target, not a rule for every sport or every body, but it shows why strength comes first.

The same source warns that when stronger athletes stop emphasising strength, they lose it quickly, and that can hurt their power, sprinting and agility. So power work is added on top of strength work, not in place of it.

The lifts that matter most

Most strength programmes for athletes are built on a short list of whole-body, multi-joint exercises. The IOC’s Handbook of Sports Medicine and Science on strength training names power cleans, power snatches, deadlifts, lunges and squats as structural exercises that need coordinated movement at several joints.

The NSCA position statement on weightlifting for sports performance goes further. It says weightlifting exercises and their derivatives, such as cleans and pulls, produce greater gains in force production and athletic tasks than general resistance training or plyometrics alone. It cites a meta-analysis in which weightlifting training beat traditional resistance training for maximum strength, jump height, linear sprint and change of direction.

The statement also stresses that these lifts need sensible programming: a sequence across training blocks, with progression in exercise variation, load and volume, and proper attention to technique. If you are new to barbell work, learn the movements well before you load them.

Match the exercise to the movement

Specificity matters too. A 2006 review of training transfer, summarised in the research we drew on, points out that bilateral vertical lifts such as squats have little direct transfer to sprinting on their own, while single-leg and horizontal work does more for sprint acceleration. The practical point is that the gym should feed the demands of your sport:

  • Running and field sports: squats, deadlifts and lunges for a strong base, plus single-leg and horizontal work.
  • Jumping sports: squats and pulling variations, then jumps once your base is solid.
  • Endurance sports: the NSCA’s guidance for endurance athletes says to prioritise closed-chain lifts, where your feet stay planted, such as squats, because they demand more coordination and give a greater performance benefit than open-chain machine work.

If you are earlier in your lifting career, our guide to the novice programme Starting Strength shows how a simple structure builds the base this section describes.

Sets, reps, load and frequency

The American College of Sports Medicine position stand gives a clear split between the two qualities:

Goal Load Volume How
Strength 80% of 1RM or more 2 to 3 sets Full range of motion, at the start of the session, at least twice a week
Power 30% to 70% of 1RM Low to moderate, up to 24 repetitions × sets in total Olympic-style lifts and fast concentric work

1RM means one-repetition maximum: the heaviest weight you can lift once with good form. If you have never tested it, a lighter set taken close to failure gives a workable estimate.

Heavier is better for the speed of force production too. The NSCA position statement reports that training at 80% to 90% of 1RM improved rapid force production more than training at 60% to 82.5%. That matters because in sport you rarely have time to apply maximum force slowly.

Rest between sets

Heavy lifting needs recovery between sets. The IUSCA position stand on maximising muscle says rest periods should generally be at least 2 minutes for multi-joint exercises, with 60 to 90 seconds fine for single-joint and some machine exercises. Cutting rest short on squats and deadlifts to save time costs you the quality of the sets that matter.

How much is enough in one session

More is not automatically better. The same position stand suggests capping a session at roughly 10 sets per muscle and spreading any extra volume across more days in the week. For athletes already doing hours of sport practice, that is a useful ceiling.

On session length: there is no checked figure for a universal minimum. For young athletes, the American Academy of Pediatrics recommends 2 to 3 sessions a week of 20 to 30 minutes, with 2 to 3 sets of 8 to 15 repetitions, and says a well-designed programme of at least 8 weeks can raise strength by 30% to 50%. Short, focused sessions can work when they are consistent and well built. Young athletes should train under qualified supervision.

Progression, recovery and the competitive season

The biggest mistake athletes make is not the exercises they pick. It is how fast they add work.

Add volume slowly

The IUSCA stand suggests limiting increases in sets for a muscle group to about 20% of your previous volume over a training cycle of roughly 4 weeks, then readjusting. If you did 10 weekly sets for your quads, the next block goes to about 12.

Move from heavy to fast

For endurance athletes with little lifting experience, the NSCA’s model starts with high-force, low-velocity work to build a neuromuscular base. Once you have reached a certain strength level, you add low-force, high-velocity work. The same logic suits most athletes: heavy first, fast later.

Keep lifting in season

Strength does not stop when the fixtures start. The Netball Victoria physical performance guide advises continuing strength sessions through the whole season, dropping volume while keeping intensity. A 2018 NSCA paper on in-season soccer training says a nonlinear approach, with session-by-session changes in intensity and focus, suits a changing fixture list because sessions are easy to modify. It also notes that fitting lifting around other training matters, because concurrent training can interfere with adaptation, so leave as much rest as you can between different kinds of work.

That paper’s author context is British football, but the principle applies to any sport with a congested calendar: when the week changes, the session should change with it.

Recovery basics

The Netball Victoria guide names three recovery pillars: replace fluid (1.5 litres per kilogram of body weight lost), eat protein and carbohydrate within the hour after training (25 g of protein with 1 g of carbohydrate per kilogram of body weight), and sleep 8 to 10 hours a night. Those are figures from an Australian sports body for its athletes, so treat them as a reference point and adjust for your own sport and body size.

Three athlete recovery pillars and targets

Soreness is a separate question. Our article on training with muscle soreness explains when to carry on and when to rest. If you get sharp or lasting pain, see a doctor or physiotherapist.

If you coach or play football, this guide to injury risk assessment in football looks at how training load and injury risk connect.

How to tell whether your strength work is paying off

Strength training for sport has one goal: more force, speed and power where you need them. The 2021 review of velocity-based training says a positive programme changes either the bar speed you get with a fixed load, or the load you can move at a fixed speed. It recommends re-assessing every 4 to 6 weeks, or after a specific training cycle, because that is how long these measures take to shift.

You do not need specialist equipment to apply the principle. Here is a practical routine:

  1. Record every session: exercise, load, sets, repetitions and how hard it felt.
  2. Pick two or three benchmark lifts that match your sport, such as a back squat and a deadlift.
  3. Review every 4 to 6 weeks. Are you lifting more for the same effort, or the same weight more easily?
  4. Compare with your sport: has your jumping, sprinting or change of direction improved over the same period?
  5. Change something when progress stalls: the exercise, the load, the volume or the rest.

This is where Brolick takes the weight off. It logs your workouts and progress, analyses your training history, and detects plateaus. It then recommends training intensity, rest periods and exercise selection based on what you have actually done, so step 5 does not rely on guesswork.

Putting it into a week

A simple template for a field or court athlete, which you would adapt to your sport and level:

  • Two strength sessions: heavy squat or deadlift variations first, then a pull and a single-leg exercise, 2 to 3 hard sets at 80% of 1RM or more, with 2 minutes or more of rest.
  • One power element: lighter, fast lifts or jumps in the 30% to 70% range, kept low in volume, once your base is in place.
  • Sessions placed away from hard sport days, so that the legs are fresh for the work that matters.
  • In season: the same lifts at similar loads, but fewer sets.

What changes from one athlete to the next is the detail: how heavy is heavy for you, how much rest you need, how your body responds. Fixed programmes cannot know that. A plan that learns from your logged training can.

Brolick: training that adapts as you do

Brolick is an intelligent fitness tracker that learns from your workouts and adapts your training. It records your sessions, analyses your training patterns, performance and preferences, and suggests daily routines and program-based guidance. You can build custom routines and get insights from your historical data. It does not share your data or use it for external AI training.

Brolick is available now on Google Play (Android) and coming soon to the App Store. You can find out more at brolick.co.uk.

Brolick

Our view on strength training for athletes

Most athletes we would describe as under-served do not lack effort. They lack feedback. A static plan says squat at the same load for eight weeks. A real season does not behave like that: fixtures move, sleep slips, a lift stalls.

That is why we built Brolick as an intelligent fitness tracker that learns from your workouts and adapts your training. Strength work follows a clear logic: heavy first, then fast, volume added gradually, intensity kept in season. Applying that logic to your own numbers is the hard part, and it is the part we think software should do.

When Brolick looks at your training history, it can recommend training intensity, rest periods and exercise selection, and flag a plateau before you lose weeks to it. Our aim is simple: less guesswork, more of your sessions spent on the work that moves your sport forward.

the author

FAQ

What is the best strength training programme for athletes?

The best programme is the one matched to your sport, level and calendar. Most are built on squats, deadlifts, lunges and pulling or weightlifting variations, performed heavy (80% of 1RM or more) at least twice a week, then topped with fast, lighter power work. Progress it gradually and adjust it with your logged results.

Is 20 minutes of strength training a day enough for an athlete?

Short sessions can work when they are well built. For young athletes, the American Academy of Pediatrics recommends 20 to 30 minutes, 2 to 3 times a week, rather than daily. Heavy lifting needs recovery, so daily strength sessions are not the aim. Better to train fewer days with proper rest between sets.

How is strength training different from power training?

Strength training moves heavier loads at a controlled speed to build maximum force. Power training uses lighter loads moved fast to build the speed of force production. Strength comes first, because a stronger athlete has more force to turn into power.

Should I keep lifting during the season?

Yes. Guidance from sports bodies and NSCA research is to keep strength sessions through the season, reducing volume while keeping intensity. Strength is lost quickly when you stop training it, which can hurt sprinting and agility.

Sources